XP driver for 1680x1050 display / IEGD Driver

[ToF]

Hi,
I have downloaded the IEGD software : http://edc.intel.com/Software/Downloads/IEGD/

I can't manage to produce a functional driver for XP for my display : depending on options I choose in the IEGD software, either resolution 1680x1050 doesn't appear in the list for display configuration or driver is not functional (means I have a black screen at Windows opening and no signal sent to display).

In IEGD I manage to create a new DTD (see screen copy attached).

I then create a new configuration :
Parameters for the 1st page of IEGD configuration editor : single display, enable display detection, port order : sDVO and then LVDS (see screen copy).

Parameters for 2nd page of IEGD configuration editor : all check boxes ticked for EDID option but I don't know what to parameter for DVO devices, attribute settings so I ticked every choice ...

I didn't filled any option in the attributes pages ... perhaps it is an error ??

[ToF]

...

Last screen copy for LVDS configuration (no attributes settings have been parametered).

Page 4 and 5 of configuration set up attached ...

[ToF]

...

I have then produced a new package with my configuration and target OS : XP/XPe.

Result is not working : black screen at windows opening : no signal detected by my display.

FitPc2i works pretty well and the only issue regards this display driver problem.

Hope you can help.

Best regards.

MyConf : Fit Pc2i (Nr-100521-051) - WinXP Pro SP3 - display Fujitsu Scaleoview H22w-1

[irads]

IEGD driver generator is beyond the scope of our support. I will try to provide a few tips - but I am not an expert on that. For more details consult IEGD documentation.

fit-PC2 is using only the SDVO interface with a Chrontel CH7307 DVI transmitter. LVDS interface is not used. Settings in IEGD should be chosen accordingly.

Attached please find reference IEGD configuration file for fit-PC2 you can start with. First generate a driver and see it is working, then modify configuration as per your needs.