"lshw -C network" should show me information about all my network devices, including the driver each one requires.
For example, see topic: http://fit-pc2.com/forum/viewtopic.php? ... hilit=lshw
The user in this example found his wireless card by the above command and then located the driver name for his card which was: rt3090sta
The output of this command on my fit-PC2i machine does not show information for any such wireless card. These are the only two network devices shown:
*-pci:0
description: PCI bridge
product: System Controller Hub (SCH Poulsbo) PCI Express Port 1
vendor: Intel Corporation
physical id: 1c
bus info: pci@0000:00:1c.0
version: 07
width: 32 bits
clock: 33MHz
capabilities: pci pciexpress pm bus_master cap_list
configuration: driver=pcieport-driver
resources: irq:17 ioport:2000(size=4096) memory:d0100000-d01fffff memory:d0500000-d05fffff(prefetchable)
*-network
description: Ethernet interface
product: RTL8111/8168B PCI Express Gigabit Ethernet controller
vendor: Realtek Semiconductor Co., Ltd.
physical id: 0
bus info: pci@0000:02:00.0
logical name: eth0
version: 02
serial: 00:01:c0:07:61:c6
size: 10MB/s
capacity: 1GB/s
width: 64 bits
clock: 33MHz
capabilities: pm msi pciexpress msix vpd bus_master cap_list rom ethernet physical tp mii 10bt 10bt-fd 100bt 100bt-fd 1000bt 1000bt-fd autonegotiation
configuration: autonegotiation=on broadcast=yes driver=r8169 driverversion=2.3LK-NAPI duplex=half latency=0 link=no multicast=yes port=MII speed=10MB/s
resources: irq:16 ioport:2000(size=256) memory:d0100000-d0100fff memory:d0500000-d050ffff(prefetchable) memory:d0520000-d053ffff(prefetchable)
*-pci:1
description: PCI bridge
product: System Controller Hub (SCH Poulsbo) PCI Express Port 2
vendor: Intel Corporation
physical id: 1c.1
bus info: pci@0000:00:1c.1
version: 07
width: 32 bits
clock: 33MHz
capabilities: pci pciexpress pm bus_master cap_list
configuration: driver=pcieport-driver
resources: irq:16 ioport:3000(size=4096) memory:d0200000-d02fffff memory:d0600000-d06fffff(prefetchable)
*-network
description: Ethernet interface
product: RTL8111/8168B PCI Express Gigabit Ethernet controller
vendor: Realtek Semiconductor Co., Ltd.
physical id: 0
bus info: pci@0000:03:00.0
logical name: eth1
version: 02
serial: 00:01:c0:07:61:c7
size: 10MB/s
capacity: 1GB/s
width: 64 bits
clock: 33MHz
capabilities: pm msi pciexpress msix vpd bus_master cap_list rom ethernet physical tp mii 10bt 10bt-fd 100bt 100bt-fd 1000bt 1000bt-fd autonegotiation
configuration: autonegotiation=on broadcast=yes driver=r8169 driverversion=2.3LK-NAPI duplex=half latency=0 link=no multicast=yes port=MII speed=10MB/s
resources: irq:17 ioport:3000(size=256) memory:d0200000-d0200fff memory:d0600000-d060ffff(prefetchable) memory:d0620000-d063ffff(prefetchable)
*Note: drivers are only shown if the device has been claimed by a loaded module; otherwise, device is listed as UNCLAIMED.
Missing wireless card?
-
- Posts: 16
- Joined: Wed May 12, 2010 1:45 am
-
- Posts: 16
- Joined: Wed May 12, 2010 1:45 am
Re: Missing wireless card?
Post by timeofmind »
The wireless card was shown by lshw once the RT2870STA module was loaded. It now operates without issue.
Jump to
- Announcements
- ↳ Read me first
- ↳ News
- ↳ Ordering
- Tensor-PC
- ↳ General Tensor-PC questions
- ↳ Tensor-PC Hardware
- ↳ Tensor-PC Software
- fitlet3
- ↳ General fitlet3 questions
- ↳ fitlet3 hardware
- ↳ fitlet3 software
- ↳ fitlet3 FACET Cards
- Airtop3
- ↳ General Airtop3 questions
- ↳ Airtop3 Hardware
- ↳ Airtop3 Software
- ↳ Airtop3 I3M
- fitlet2 and MBM2
- ↳ General fitlet2 questions
- ↳ fitlet2 hardware
- ↳ fitlet2 software
- ↳ fitlet2 FACET Cards
- ↳ Cool stuff with fitlet2
- Airtop2
- ↳ General Airtop2 questions
- ↳ Airtop2 Software
- ↳ Airtop2 Hardware
- ↳ Airtop2 I3M
- Mature products
- ↳ Airtop
- ↳ General Airtop questions
- ↳ I3M
- ↳ IPC2 (Intense PC2)
- ↳ General IPC2 questions
- ↳ IPC2 availability
- ↳ IPC2 Hardware
- ↳ Linux on IPC2
- ↳ Windows on IPC2
- ↳ Other operating systems on IPC2
- ↳ IPC2 BIOS
- ↳ IPC2 faults and troubleshooting
- ↳ Intense PC and MintBox 2
- ↳ General Intense PC questions
- ↳ Intense PC hardware
- ↳ CPU & Chipset
- ↳ Display interface
- ↳ Memory
- ↳ Storage
- ↳ Ethernet
- ↳ WLAN and miniPCI-e
- ↳ Audio
- ↳ USB
- ↳ Power and heat
- ↳ Linux on Intense PC
- ↳ Linux Mint
- ↳ Other distributions
- ↳ Windows on Intense PC
- ↳ Win7 on Intense PC
- ↳ Win8 on Intense PC
- ↳ Audio
- ↳ Intense PC BIOS
- ↳ Android on Intense PC
- ↳ Intense PC faults and troubleshooting
- ↳ fitlet and MintBox Mini
- ↳ General fitlet questions
- ↳ fitlet performance
- ↳ fitlet hardware
- ↳ Memory
- ↳ Storage
- ↳ Power and heat
- ↳ Mechanical
- ↳ fitlet BIOS
- ↳ Linux on MintBox Mini / Linux on fitlet
- ↳ Windows on fitlet
- ↳ Other operating systems on fitlet
- ↳ FACET Cards
- ↳ fitlet compatible devices
- ↳ Cool stuff with fitlet
- ↳ fitlet faults and troubleshooting
- ↳ fit-PC4
- ↳ General fit-PC4 questions
- ↳ fit-PC4 hardware
- ↳ Windows on fit-PC4
- ↳ Linux on fit-PC4
- ↳ Other operating systems on fit-PC4
- ↳ fit-PC4 BIOS
- ↳ fit-PC4 faults and troubleshooting
- ↳ fit-PC3
- ↳ General fit-PC3 questions
- ↳ fit-PC3 hardware
- ↳ Display interface
- ↳ Storage
- ↳ Audio
- ↳ WLAN and miniPCI-e
- ↳ USB
- ↳ Power and Heat
- ↳ Ethernet
- ↳ Windows on fit-PC3
- ↳ Linux on fit-PC3
- ↳ Other operating systems on fit-PC3
- ↳ fit-PC3 BIOS
- ↳ fit-PC3 accessories
- ↳ Using fit-PC3
- ↳ fit-PC3 faults and troubleshooting
- ↳ fit-PC2
- ↳ General fit-PC2 questions
- ↳ Buying fit-PC2
- ↳ Linux on fit-PC2
- ↳ Linux Mint
- ↳ Ubuntu 9.10
- ↳ Ubuntu 10.04
- ↳ Ubuntu 10.10
- ↳ Ubuntu 11.04
- ↳ Other Linux distributions
- ↳ Ubuntu 8.04
- ↳ Ubuntu 9.04
- ↳ Display driver
- ↳ Multimedia in Linux
- ↳ Multimedia in Mint
- ↳ Windows on fit-PC2
- ↳ Windows 7
- ↳ Windows 7 display driver
- ↳ Audio in Win7
- ↳ Windows XP
- ↳ XP installation
- ↳ Display driver
- ↳ Video playback
- ↳ Audio in XP
- ↳ Other Windows versions
- ↳ Other operating systems on fit-PC2
- ↳ FreeBSD
- ↳ fit-PC2 hardware
- ↳ fit-PC2i hardware
- ↳ Display interface
- ↳ Storage
- ↳ Audio
- ↳ WLAN and miniPCI-e
- ↳ USB
- ↳ Auto-ON
- ↳ Power and Heat
- ↳ Ethernet
- ↳ RTC & System clock
- ↳ fit-PC2 BIOS
- ↳ BIOS updates fit-PC2
- ↳ BIOS updates fit-PC2i
- ↳ fit-PC2 accessories
- ↳ Using fit-PC2
- ↳ HTPC
- ↳ Server
- ↳ Control
- ↳ Verified displays
- ↳ Car PC
- ↳ fit-PC1 questions
- ↳ fit-PC Slim questions
- ↳ uSVR
- ↳ General uSVR questions
- ↳ IPC3
- ↳ General IPC3 questions
- ↳ IPC3 Software
- ↳ IPC3 Hardware
- ↳ FACE modules
- ↳ FACE Modules
- ↳ General FACE Module questions
- Compulab accessories
- ↳ fit-Headless and fit-Headless 4K
- ↳ fit-Uptime
- ↳ fit-statUSB
- ECN/PCN
- ↳ fitlet3 ECN/PCN
- ↳ Tensor-I20 ECN/PCN
- ↳ Tensor-I22 ECN/PCN
- ↳ fitlet2 ECN/PCN
- ↳ Airtop3 ECN/PCN
- ↳ IPC3 ECN
- ↳ fitlet1 ECN
- ↳ IPC2 ECN
- ↳ IPC1 ECN
- ↳ Airtop2 ECN
- ↳ Airtop1 ECN
- ↳ fit-PC4 ECN
- ↳ fit-PC3 ECN
- ↳ fit-PC2 ECN
- ↳ FACE Modules ECN
- ↳ FACET Cards ECN
- Wish list
- ↳ Addressed requests