Hi,
My name is Martin and I bought a fit-PC2i for some years ago from you and I must say I am very pleased with It.
The problem I have now is that the cmos battery looks to be out of power and every time the power fails the bios set back to default again.
Is it possible or how to change the Bios Battery?
Best Regards
Martin
fit-PC2i How to replace cmos battery?
Re: fit-PC2i How to replace cmos battery?
Hello Martin
The battery is soldered to the base board. You can unsolder it and replace, but do it only on your own risk, because it will void your warranty. A possible solution to your problem is to save your BIOS setup as default. In a case of a power lose, the FitPC2 will load the desired settings. RTC will be updated with internet time
The battery is soldered to the base board. You can unsolder it and replace, but do it only on your own risk, because it will void your warranty. A possible solution to your problem is to save your BIOS setup as default. In a case of a power lose, the FitPC2 will load the desired settings. RTC will be updated with internet time
Gabriel Heifets
Fit-PC2/3/IntensePC support.
Fit-PC2/3/IntensePC support.
Re: fit-PC2i How to replace cmos battery?
Hi, Gabrielh
Ok, Thanks for the info.
mvh
Martin
Ok, Thanks for the info.
mvh
Martin