IDE ATA/ATAPI Controllers issue

[girotel]

Hello,

In the bios I have configured the option to boot SSD hard-disk with AHCI (legacy mode).

During the first cold boot of the bios the windows device manager shows the following in Windows 7 X64:

IDE ATA/ATAPI controllers
- ATA Channel 0
- ATA Channel 1
- Standard Dual Channel PCI IDE Controller (hardware Ids PCI\VEN_8086&DEV_1E3C&SUBSYS_72708086&REV_04)
- Standard SATA AHCI Controller (hardware Ids PCI\VEN_8086&DEV_1E03&SUBSYS_72708086&REV_04)

When I do a warm reboot the Standard Dual Channel PCI IDE Controller is gone (like it should be because I choose AHCI in bios)

The windows device manager then shows the following:

IDE ATA/ATAPI controllers
- Standard SATA AHCI Controller (hardware Ids PCI\VEN_8086&DEV_1E03&SUBSYS_72708086&REV_04)


BIOS Version: CR_2.2.0.262 X64
Intense PC Pro Intel Core i7-3517UE
Hard-disk OCZ-VERTEX4 (hardware Ids SCSI\Disk_____________OCZ-VERTEX4_1.5)


Could this be corrected ?

Thank you.

[girotel]

Hi,

Could you confirm that this issue exsists and replicate these results ?

Thank you

[gabrielh]

Dear girotel

This is a driver related issue. Because this is Intel's a closed source driver, we are unable to modify it.

[girotel]

Hello,

Thanks for the response.

Software issue ?

Perhaps you could ask Intel to fix this problem ?

Never ever experienced these kind of issues on other computers.

With kind regards

Girotel

[gabrielh]

Good Day girotel

After several tests, there was not seen any performance differences between both of the cases. We will submit this issue to Intel.

Thank you for reporting.

[girotel]

Hello,

Any Response from intel ?

[gabrielh]

Good evening.

Not yet. Sorry