Coming fully back up after power loss

[ilia]

Thanks.
I'll try this night.

Ilia.

[ilia]

The problem does not reproduces right now
It looks that no amount of waiting in power-off causes by itself the FitPC3 to not start on power on.
The "AC Loss control setting" BIOS parameter is and always was in "Power ON" state.

Do you have some insight on the FitPC3' power regulator -
i.e. can you think on the power up/down scenario, which can cause it to not start automatically?
Our customer is very sensitive on the matter, as they need the FitPC to operate unattended where there is no human being close.

If there are matters you prefer to not disclose in the public forum, you can mail me personally at: ilia@embedded-solutions.co.il

Thanks a lot.
Ilia

[gabrielh]

Sometimes connected peripheral devices might interfere with power up sequence leading to failure in booting on power resume.

Failure in boot on power resume may also be related to the specific fit-PC3 unit.

I suggest
1. Try to reproduce the problem with all peripherals connected.
2. Selectively disconnect peripherals and try to reproduce.

Please report about the findings. We will try to determine if the failure is transient or symptomatic, and if RMA is due.