I got my fti-PC3 (ribbed) in and I added a hard drive, but the system will not boot up, nor will the BIOS show up. The power is on, but nothing happens on the monitor. Is there a way to reset the BIOS, or is something else wrong?
-Clyde
fit-PC3 not booting (solved)
-
irads
Re: fit-PC3 not booting
Problem may be with display connection or with the unit itself.
Please note that fit-PC3 is tested to be working before shipping.
Please take-out the hard disk and make sure the SODIMMs are sitted firmly in place. BIOS setup is accessible with or without the hard disk by pressing F2 at power up.
Does keyboard Numlock indicator respond and mouse light on power up?
How is the display connected and to which port?
If possible try to reach BIOS setup when connected to another display.
If the fit-PC3 still fails to reach BIOS setup please email rma@fit-pc.com
Please note that fit-PC3 is tested to be working before shipping.
Please take-out the hard disk and make sure the SODIMMs are sitted firmly in place. BIOS setup is accessible with or without the hard disk by pressing F2 at power up.
Does keyboard Numlock indicator respond and mouse light on power up?
How is the display connected and to which port?
If possible try to reach BIOS setup when connected to another display.
If the fit-PC3 still fails to reach BIOS setup please email rma@fit-pc.com
Re: fit-PC3 not booting
Thanks so much, your instructions worked just fine. The FIT is now operational.
-Clyde
-Clyde