Page 1 of 1
Website feedback for FitPC3 - Identify all of the IO ports
Posted: Fri May 11, 2012 3:23 pm
by NHpc2
It took me quite a while to find a document that identified which audio port is the input and which is the output. It would be nice if the main website identified all of the ports on the back of the FitPC3. The diagram I finally found is this one:
http://www.opencompany.dk/pdf/fit_pc3_d ... ompany.pdf
My recommendation is to modify the System and IO page:
http://www.fit-pc.com/web/introduction- ... em-and-io/
so that the System and IO page identifies all of the ports.
Re: Website feedback for FitPC3 - Identify all of the IO por
Posted: Fri May 11, 2012 9:46 pm
by igor
We appreciate the feed-back. I completely agree - this information is not accessible enough. We will modify the website to rectify that. In addition, please note the fit-PC3 documentation repository at
http://www.fit-pc.com/wiki/index.php?title=Main_Page and
http://www.fit-pc.com/wiki/index.php/Fi ... on#fit-PC3.
Re: Website feedback for FitPC3 - Identify all of the IO por
Posted: Sun May 13, 2012 7:23 am
by Arwen
As a professional computer support person, I also find hardware
documentation quite valuable. For example the Sun System Handbook
is very useful when I work as a Solaris System Administrator. This
handbook included sections for processor, it's speed, and core count.
Plus, annotated pictures, I/O port with exact feature set, vendor
supplied parts, (and there exact feature set).
With the fit-PC 3 having so many variants, it might be wise to have
something like the Sun System Handbook.
Plus, one nice feature about that web handbook was that I could E-Mail
changes or update when I found missing or in-correct information. This
worked both when I worked for Sun and not. I personally have submited
hundreds of updates over the last 10 years.
If you want assistance setting up something like that I can certainly
assist, as can others. In fact, you can setup a separate sub-forum for
documentation updates and discussions.