ethernet not working
ethernet not working
We have several units that the ethernet ports only work intermittently. Any suggestions on how to get them to work all the time?
Re: ethernet not working
What do you mean work intermittently?
What do you mean several units? If so, probably some SW mismatch.
Please try re-install the drivers of the relevant Ethernet controllers.
What do you mean several units? If so, probably some SW mismatch.
Please try re-install the drivers of the relevant Ethernet controllers.
Re: ethernet not working
The ethernet ports seem to randomly appear and disappear in the device manager. We have had 5 units demonstrating this behavior. We have reinstalled the appropriate drivers and got the same behavior.
Re: ethernet not working
Please reply what is the HW revision of fit-PC2 you experience the problems with? Which Ethernet controller is on board?
Older revisions use RTL8111C device, while newer use RTL8111F.
Older revisions use RTL8111C device, while newer use RTL8111F.
Re: ethernet not working
I've attached a pic of the ethernet ports listed through terminal. It does not specify if the device is RTL8111F or RTL8111C. I assume rev 7 is the revision number.
- Attachments
-
- 2013-10-22_11-23-11_44.jpg (1.77 MiB) Viewed 12014 times
Re: ethernet not working
Do you use Linux or Windows?
You're saying device manager but the capture is Linux terminal.
Please specify the exact OS.
You're saying device manager but the capture is Linux terminal.
Please specify the exact OS.