fitPC2i SATA connection

Issues specific to fit-PC2i
Post Reply
sahamzah
Posts: 4
Joined: Mon Apr 22, 2013 8:27 am

fitPC2i SATA connection

Post by sahamzah »

Hi,

I would like to connect my SATA hard drive to fitPC2i connector via onboard P30 pin holes.

Can you recommend the suitable socket?
An what is the pin assignment for the pin holes since I cannot find it in the manual.

Tq

gabrielh
Site Admin
Posts: 1260
Joined: Thu Jun 02, 2011 1:13 pm

Re: fitPC2i SATA connection

Post by gabrielh »

fitPC2i supplied with such a connector. Are you talking about fitPC2 SBC?
Gabriel Heifets

Fit-PC2/3/IntensePC support.

sahamzah
Posts: 4
Joined: Mon Apr 22, 2013 8:27 am

Re: fitPC2i SATA connection

Post by sahamzah »

Yes, the SBC type that is used in Darwin OP Humanoid.

gabrielh
Site Admin
Posts: 1260
Joined: Thu Jun 02, 2011 1:13 pm

Re: fitPC2i SATA connection

Post by gabrielh »

Please contact sales@fit-pc.com for details.
Gabriel Heifets

Fit-PC2/3/IntensePC support.

sahamzah
Posts: 4
Joined: Mon Apr 22, 2013 8:27 am

Re: fitPC2i SATA connection

Post by sahamzah »

Ok. I will contact sales but at the same time since I need the SATA interfacing working urgently, can I have the SATA pin assignment onboard fitPC2i SBC? I will make my own connector.

gabrielh
Site Admin
Posts: 1260
Joined: Thu Jun 02, 2011 1:13 pm

Re: fitPC2i SATA connection

Post by gabrielh »

Sure
P1-GND
p2-Sata TX+
p3-Sata TX-
p4-GND
P5-Sata RX-
P6-Sata RX+
p7-GND
P8-NC
P9,10- +5V
P11-NC
p12-NC
Gabriel Heifets

Fit-PC2/3/IntensePC support.

sahamzah
Posts: 4
Joined: Mon Apr 22, 2013 8:27 am

Re: fitPC2i SATA connection

Post by sahamzah »

Thanks for the pin assignment.

I was informed by your sales department that the type of connector is ADP-SATA but they only sell in volume.

Do you know where can I purchase only for small quantity (5 units)

gabrielh
Site Admin
Posts: 1260
Joined: Thu Jun 02, 2011 1:13 pm

Re: fitPC2i SATA connection

Post by gabrielh »

This is a custom PCB made by a Compulab. You can check availability at our resellers
Gabriel Heifets

Fit-PC2/3/IntensePC support.

Post Reply

Return to “fit-PC2i hardware”