connecting a dc-dc converter/ups

Is fit-PC2 good for my intended application?
Post Reply
ralphjam
Posts: 2
Joined: Thu Apr 21, 2011 1:05 am

connecting a dc-dc converter/ups

Post by ralphjam »

Hi does the fitpc2i have PSW pins or pads on the mother boards for connecting to a UPS for soft shutdown?
or if there is a unit that can send a shutdown signal after key-off to shutdown the pc gracefully via the usb port ?
cheers,

irads
Site Admin
Posts: 2365
Joined: Mon Mar 16, 2009 2:11 pm

Re: connecting a dc-dc converter/ups

Post by irads »

fit-PC2i does not have explicit soft shutdown features, but UPS can signal fit-PC2i through USB or serial.
-------------------------
Irad Stavi
Forum admin

-------------------------

ralphjam
Posts: 2
Joined: Thu Apr 21, 2011 1:05 am

Re: connecting a dc-dc converter/ups

Post by ralphjam »

Thanks for the reply irads,
can you suggest a device that can do this in a 24v vehicle application?
regards,
ralphjam

irads
Site Admin
Posts: 2365
Joined: Mon Mar 16, 2009 2:11 pm

Re: connecting a dc-dc converter/ups

Post by irads »

Not my field, sorry.
You may find experts at www.mp3car.com
-------------------------
Irad Stavi
Forum admin

-------------------------

Post Reply

Return to “Using fit-PC2”