Edge Computing Division Users Forum

Hi

I fail to download or upload a nand image from/to fitpc2i with the Etherlink BIOS option. I'm using latest bios 9/14/2010. Upload BIOS and Configblock works, thus tftp connection is ok. When uploading nand image (0x00000000 - 0xffffffff) to disk.dat I get:

Uploading part 1 ...
Creating TFTP connection ...
TFTP error 1 (File not found)

Question 1
Is this really the nand flash of FitPC2i's SSD?

Question 2
Are different filenames used than disk.dat when the transfer is splittet into several parts? Or what might be wrong with this nand image transfer?

Found the reason for this error mesage: The image name disk.dat is split into disk.dat_01 behind the scenes. But now I get new error message:

Detecting NAND...
Get ID...OK
Nand flash isn't present on primary master
Nand flash not found. You should enable it in the BIOS

Exists a possibility to specify the SSD's flash as NAND flash? Respectively where can I enable it in the BIOS?

Kind regards, Markus

Please post a print screen of the BIOS's Main tab

Hi gabrielh

Attached you can find a picture of the bios main tab.

Kind regards, Markus

Unfortunately Etherlink supports only a NAND flash, and not a SSD devises