Page 1 of 1
Fit-PC2 Wireless Antenna Specs
Posted: Thu Mar 18, 2010 7:21 pm
by craighickman
I'm curious as to the specifications of the connector for the WLAN antenna. We need to purchase extensions for our FIT-PC's, as they're too deep inside of a robot for wireless to reach.
Thanks!
Re: Fit-PC2 Wireless Antenna Specs
Posted: Thu Mar 18, 2010 11:22 pm
by yogev_ezra
The antenna connector is RP-SMA.
Here is an example photo of extension cable:
- RP-SMA_extension_cable.jpeg (64.97 KiB) Viewed 9565 times
Re: Fit-PC2 Wireless Antenna Specs
Posted: Mon May 24, 2010 9:21 pm
by mpatel
lol sorry for bumping old thread but Im wondering, if we get this cable, does it matter what length (e.g will we lose performance with lets say s 9meter cable) or does it not matter?
Re: Fit-PC2 Wireless Antenna Specs
Posted: Mon May 24, 2010 9:27 pm
by yogev_ezra
It will lose performance of course, but the equation is pretty complex.
You need to know the cable type, materials used, etc.
Here is an example:
http://www.timesmicrowave.com/cgi-bin/calculate.pl