CPU overheating sequence
Posted: Wed Jan 15, 2014 8:07 pm
If the CPU overheats pass TM1 and TM2 states in a runaway and reaches the absolute critical temp of 120C, Intel states the processor will shutdown and Vcc should be removed in a specified time.
I assume the FITPC2 and BIOS control will remove power from the CPU at this time.
When that occurs and the PC is effectively shutdown, will it:
1. Reset itself immediately and try to power up again? or
2. Reset itself automatically after THEMRTRIP is deasserted and cool down occurs? Or
3. Reset itself automatically after some time delay? Or
4. Stay powered off until power is cycled manually? Or
5. Stay powered off until power button is pushed?
We have an unmonitored unit in the desert of Australia during this heat wave and need to know the power control during an overheating event.
Thank you
I assume the FITPC2 and BIOS control will remove power from the CPU at this time.
When that occurs and the PC is effectively shutdown, will it:
1. Reset itself immediately and try to power up again? or
2. Reset itself automatically after THEMRTRIP is deasserted and cool down occurs? Or
3. Reset itself automatically after some time delay? Or
4. Stay powered off until power is cycled manually? Or
5. Stay powered off until power button is pushed?
We have an unmonitored unit in the desert of Australia during this heat wave and need to know the power control during an overheating event.
Thank you