Can I make the comp. Restart automatically after power failure?
[Fit-pc2 xp]
Restart after power failure
-
- Posts: 539
- Joined: Sun Mar 22, 2009 2:49 pm
Re: Restart after power failure
You need to order -ON option (auto-on).
Re: Restart after power failure
I have one of the older Fit-PC2 boxes, which does not boot automagically on power-on cf. http://www.fit-pc2.com/wiki/index.php?title=Fit-PC2_FAQ
"Starting from May-2010 fit-PC2 and fit-PC2i support 'auto-on'. Older fit-PC2 (rev 1.21) does not boot automatically when power is resumed."
Is there any way that I can patch the older model to get the box to power up after power failure?
We just had a major power failure in Copenhagen, which made me painfully aware of this limitation
"Starting from May-2010 fit-PC2 and fit-PC2i support 'auto-on'. Older fit-PC2 (rev 1.21) does not boot automatically when power is resumed."
Is there any way that I can patch the older model to get the box to power up after power failure?
We just had a major power failure in Copenhagen, which made me painfully aware of this limitation
Re: Restart after power failure
Hi Peter,
Unfortunately implementing the auto-on feature is factory-only change. It requires soldering an RC circuit onto power management.
Best regards,
Unfortunately implementing the auto-on feature is factory-only change. It requires soldering an RC circuit onto power management.
Best regards,
Re: Restart after power failure
Anything that I could do?
I have been solding a lot in my earlier life...
I have been solding a lot in my earlier life...
Re: Restart after power failure
Unfortunately this is factory-only for a reason. It is just too easy to do it wrong and brick the unit (eg by overheating the capacitor changing its value).