Page 1 of 1
OpenBSD 4.6
Posted: Sun Oct 25, 2009 2:47 pm
by spkf
Hi,
Does anyone has succeeded install the new release OpenBSD 4.6 on Fit-PC2 ??
What is working or not ?
Thx
Re: OpenBSD 4.6
Posted: Fri Apr 16, 2010 10:14 pm
by ido
I would also like to know the answer to this question.
Specifically, I would like to know whether OpenBSD supports the NIC chipset in fitPC2i which is Realtek 8111c. Tried googling it, but got mixed results.
Thanks in advance, Ido.
Re: OpenBSD 4.6
Posted: Sun May 02, 2010 9:22 pm
by not-a-bob
I don't know, but I plan on finding out once mine arrives in a week or two. I'll also be testing FreeBSD 8 on it.
Will post my results.
Re: OpenBSD 4.6
Posted: Mon May 03, 2010 7:50 pm
by ido
*crossing fingers*
Re: OpenBSD 4.6
Posted: Tue May 18, 2010 1:07 am
by not-a-bob
Success with OpenBSD 4.6 32 bit. Both nics and the wireless were detected and seemed to work. I did not test X or sound.
I had some issues with FreeBSD 8.0, but I think they were the result of an old gpart scheme on the drive, and/or some strangeness with 8.0's installer. I'm installing 7.3 on the machine now and it seems to work, at least the nics do.
Re: OpenBSD 4.6
Posted: Tue May 18, 2010 3:13 am
by not-a-bob
Ah, there was a bios option I had to tweak, something about the hard drive was set to DOS. Setting that to Other got me past the seg fault w/FreeBSD 8.
Re: OpenBSD 4.6
Posted: Tue May 18, 2010 11:59 am
by ido
Thank you very much! I'll be ordering my fitPC2i very soon!
Re: OpenBSD 4.6
Posted: Sat Aug 21, 2010 7:11 pm
by nlg
Can I get a confirmation on that audio/video works properly?
Re: OpenBSD 4.6
Posted: Sat Aug 21, 2010 7:53 pm
by fly
Can I get a confirmation on that audio/video works properly?
Video will probably not work, as the gma500 drivers are closed source and even with linux they are poor supported. If you only need basic 2d via vesa mode, you should be okay.