I have a fitpc2 since august 2009. It is a headless server, without any mouse/keyboard nor screen.
I configured once, then I unplug the screen and other devices. Everything is controlled by ssh and it works great. I'm really happy with it.
Nevertheless, I have a freezing issue. I guess it is related to copy a lot of small files onto a smb share. The fitpc freezes and I have to manually restart it.
I dig a bit onto the forums and I found that maybe there is a bios config which can help me. So I plug a screen on the fit and restart it.
Nothing appeared on the screen, I try 3 monitors and 3 dvi/hdmi cables and always "no signal detected". So I guess the hdmi output is broken somewhere.
I try to start it up without the hdd but nothing appeared, the screens displayed "no signal detected"
Is there something I can do ? Please help me Obiwan !!
Code: Select all
# get-edid | parse-edid get-edid: get-edid version 2.0.0 Performing real mode VBE call Interrupt 0x10 ax=0x4f00 bx=0x0 cx=0x0 Function supported Call successful VBE version 300 VBE string at 0x2110 "Intel(r)Poulsbo Graphics Chip Accelerated VGA BIOS" VBE/DDC service about to be called Report DDC capabilities Performing real mode VBE call Interrupt 0x10 ax=0x4f15 bx=0x0 cx=0x0 parse-edid: parse-edid version 2.0.0 Function supported Call successful Monitor and video card combination does not support DDC1 transfers Monitor and video card combination supports DDC2 transfers 0 seconds per 128 byte EDID block transfer Screen is not blanked during DDC transfer Reading next EDID block VBE/DDC service about to be called Read EDID Performing real mode VBE call Interrupt 0x10 ax=0x4f15 bx=0x1 cx=0x0 Function supported Call failed The EDID data should not be trusted as the VBE call failed Error: output block unchanged parse-edid: IO error reading EDID