FC-SCG - CAN bus on Windows

Moderator: Andrey.Mazlin

Post Reply
timnis
Posts: 1
Joined: Thu Mar 26, 2020 8:53 am

FC-SCG - CAN bus on Windows

Post by timnis »

Because our 3rd party software require Windows OS (Windows 10 IoT LTSC 2019) so we are limited to that. So can we use FC-SCG CAN -port to read data from engines ECU CAN bus (J1939).

According support feature matrix http://www.fit-pc.com/wiki/index.php/Fi ... d_features CAN bus is supported on both Linux and Windows.
On wiki there is only application note for linux but not for Windows.
So how can we utilize CAN port on windows, preferably using python. Any examples?

tamir
Site Admin
Posts: 419
Joined: Mon Dec 25, 2017 4:21 pm

Re: FC-SCG - CAN bus on Windows

Post by tamir »

Unfortunately there was a documentation fault we recently fixed, and Windows support for the FC-SCG on the provided link now states otherwise.

Post Reply

Return to “fitlet2 FACET Cards”