Intel Graphic driver update - 3D?

Moderator: Andrey.Mazlin

Post Reply
Mikael63
Posts: 74
Joined: Sun Aug 19, 2018 9:53 am

Intel Graphic driver update - 3D?

Post by Mikael63 »

On my MintBox Mini 2 Pro, running Draftsight https://www.3ds.com/products-services/d ... -download/ all handles is very slow.

On my former PC with Nvidia this also occurs but changing driver to (like) "Nvidia experimental support for 3D" it works fine.

How to do similar for my Mintbox?
I've follow this: http://fit-pc.com/wiki/index.php/Intel: ... ux_Mint_19 and also checked it again.

Linux Mint 19.1 -64 Cinnamon+MATE

Note: I'm not using 3D in Draftsight, just 2D.
Linux Mint Vera 21.1 Cinnamon @ MBM2 Pro

tamir
Site Admin
Posts: 419
Joined: Mon Dec 25, 2017 4:21 pm

Re: Intel Graphic driver update - 3D?

Post by tamir »

Linux mint has been update to 19.1 "Tessa" and the fit-pc wiki link has been changed to:
http://fit-pc.com/wiki/index.php?title= ... _Mint_19.1

Have you went through "Intel video acceleration graphic drivers" section?

Mikael63
Posts: 74
Joined: Sun Aug 19, 2018 9:53 am

Re: Intel Graphic driver update - 3D?

Post by Mikael63 »

Yes, I believe it was exact the same command for Mint 19 as for Mint 19.1.
Linux Mint Vera 21.1 Cinnamon @ MBM2 Pro

tamir
Site Admin
Posts: 419
Joined: Mon Dec 25, 2017 4:21 pm

Re: Intel Graphic driver update - 3D?

Post by tamir »

The slowness you exhibit is only in Draftsight?
Have you tried an alternative 2D SW?

Mikael63
Posts: 74
Joined: Sun Aug 19, 2018 9:53 am

Re: Intel Graphic driver update - 3D?

Post by Mikael63 »

Other much "easier" softfware works.

Running Bricscad for Windows in a virtualbox-machine also works fine.
Linux Mint Vera 21.1 Cinnamon @ MBM2 Pro

tamir
Site Admin
Posts: 419
Joined: Mon Dec 25, 2017 4:21 pm

Re: Intel Graphic driver update - 3D?

Post by tamir »

That pretty much eliminates issues with the platform itself.
I suggest you to contact the SW vendor for support on this case.

Mikael63
Posts: 74
Joined: Sun Aug 19, 2018 9:53 am

Re: Intel Graphic driver update - 3D?

Post by Mikael63 »

Well, yes.. but when using Bricscad in native Linux there is huge flickering on the screen when let say drawing a line.

Starting from terminal gives:

Code: Select all

mint@mint-fitlet2 ~ $ bricscadv13
Gtk-Message: 20:56:33.237: Failed to load module "gail"
Gtk-Message: 20:56:33.238: Failed to load module "atk-bridge"

(bricscad:17299): Gtk-WARNING **: 20:56:33.253: Kan inte hitta temamotorn i "module_path": "murrine",

(bricscad:17299): Gtk-WARNING **: 20:56:33.254: Kan inte hitta temamotorn i "module_path": "clearlooks",

(bricscad:17299): Gtk-WARNING **: 20:56:33.254: Kan inte hitta temamotorn i "module_path": "murrine",

(bricscad:17299): Gtk-WARNING **: 20:56:33.254: Kan inte hitta temamotorn i "module_path": "murrine",

(bricscad:17299): Gtk-WARNING **: 20:56:33.255: Kan inte hitta temamotorn i "module_path": "murrine",

(bricscad:17299): Gtk-WARNING **: 20:56:33.255: Kan inte hitta temamotorn i "module_path": "murrine",

(bricscad:17299): Gtk-WARNING **: 20:56:33.255: Kan inte hitta temamotorn i "module_path": "murrine",

(bricscad:17299): Gtk-WARNING **: 20:56:33.256: Kan inte hitta temamotorn i "module_path": "murrine",

(bricscad:17299): Gtk-WARNING **: 20:56:33.256: Kan inte hitta temamotorn i "module_path": "murrine",

(bricscad:17299): Gtk-WARNING **: 20:56:33.256: Kan inte hitta temamotorn i "module_path": "murrine",

(bricscad:17299): Gtk-WARNING **: 20:56:33.256: Kan inte hitta temamotorn i "module_path": "murrine",

(bricscad:17299): Gtk-WARNING **: 20:56:33.257: Kan inte hitta temamotorn i "module_path": "clearlooks",

(bricscad:17299): Gtk-WARNING **: 20:56:33.257: Kan inte hitta temamotorn i "module_path": "murrine",

(bricscad:17299): Gtk-WARNING **: 20:56:33.257: Kan inte hitta temamotorn i "module_path": "murrine",

(bricscad:17299): Gtk-WARNING **: 20:56:33.258: Kan inte hitta temamotorn i "module_path": "murrine",

(bricscad:17299): Gtk-WARNING **: 20:56:33.258: Kan inte hitta temamotorn i "module_path": "murrine",

(bricscad:17299): Gtk-WARNING **: 20:56:33.258: Kan inte hitta temamotorn i "module_path": "murrine",

(bricscad:17299): Gtk-WARNING **: 20:56:33.259: Kan inte hitta temamotorn i "module_path": "murrine",

(bricscad:17299): Gtk-WARNING **: 20:56:33.259: Kan inte hitta temamotorn i "module_path": "murrine",

(bricscad:17299): Gtk-WARNING **: 20:56:33.259: Kan inte hitta temamotorn i "module_path": "murrine",

(bricscad:17299): Gtk-WARNING **: 20:56:33.260: Kan inte hitta temamotorn i "module_path": "murrine",

(bricscad:17299): Gtk-WARNING **: 20:56:33.260: Kan inte hitta temamotorn i "module_path": "murrine",

(bricscad:17299): Gtk-WARNING **: 20:56:33.261: Kan inte hitta temamotorn i "module_path": "murrine",

(bricscad:17299): Gtk-WARNING **: 20:56:33.261: Kan inte hitta temamotorn i "module_path": "murrine",

(bricscad:17299): Gtk-WARNING **: 20:56:33.261: Kan inte hitta temamotorn i "module_path": "murrine",

(bricscad:17299): Gtk-WARNING **: 20:56:33.261: Kan inte hitta temamotorn i "module_path": "murrine",

(bricscad:17299): Gtk-WARNING **: 20:56:33.262: Kan inte hitta temamotorn i "module_path": "murrine",

(bricscad:17299): Gtk-WARNING **: 20:56:33.263: Kan inte hitta temamotorn i "module_path": "murrine",

(bricscad:17299): Gtk-WARNING **: 20:56:33.263: Kan inte hitta temamotorn i "module_path": "murrine",

(bricscad:17299): Gtk-WARNING **: 20:56:33.263: Kan inte hitta temamotorn i "module_path": "murrine",
Linux Mint Vera 21.1 Cinnamon @ MBM2 Pro

Post Reply

Return to “fitlet2 software”