Hi,
Prepare installation media
- USB Flash drive of at least 2GB should be used as installation media
- Download
Linux Mint 19.1 "Tessa" - Cinnamon (64-bit)"
- To prepare bootable USB Flash drive, please follow
How to install Linux Mint via USB tutorial
Boot from installation media
- After power-on press [F7] for one time boot menu and select USB Flash drive as boot device
Detect internal disk name
- Open the terminal, print detected disks info:
Code: Select all
$ ls -all /dev/disk/by-id/ | grep -v part
total 0
drwxr-xr-x 2 root root 160 May 22 09:33 .
drwxr-xr-x 8 root root 160 May 22 09:33 ..
lrwxrwxrwx 1 root root 9 May 22 09:33 ata-Maximus_128G_201812110460 -> ../../sda
lrwxrwxrwx 1 root root 9 May 22 09:04 usb-SanDisk_Ultra_4C530000171109106381-0:0 -> ../../sdb
- For example in my case internal disk was detected as
/dev/sda
Install the WILD image
- Open the browser, download the latest
WILD image
- For example in my case the image name was 4G-wild-0.7.2.img.xz and it was downloaded to ~/Downloads folder
- Open the terminal, write the downloaded image to the internal disk:
Code: Select all
$ xz -dc ~/Downloads/4G-wild-0.7.2.img.xz | sudo dd of=/dev/sda bs=1MB status=progress
- Power-off the device, disconnect the installation media
Boot from internal disk
- Login using default credentials u:compulab p:compulab
- Follow the
WILD usage guide