fitlet2 DIN mount

Moderator: Andrey.Mazlin

Post Reply
Karl.Palutke
Posts: 2
Joined: Thu Jun 02, 2022 6:26 pm

fitlet2 DIN mount

Post by Karl.Palutke »

I have a question about the DIN rail mount for the fitlet2. I recently built a number of items for a customer that included a DIN-mounted fitlet2. All were damaged in shipping, I suspect because of the separation between the fitlet2 and DIN rail due to the standoffs in the kit.

Do you have a recommended solution for DIN-mounting similar to what's shown on the product page (https://fit-iot.com/web/products/fitlet2/)? Can you share the necessary screw size and length to mount the DIN bracket directly to the VESA plate?

Karl.Palutke
Posts: 2
Joined: Thu Jun 02, 2022 6:26 pm

Re: fitlet2 DIN mount

Post by Karl.Palutke »

Oops! looks like I posted this in the wrong area. Is there a way for me to move it to the hardware forum?

Andrey.Mazlin
Posts: 97
Joined: Tue May 05, 2020 7:02 am

Re: fitlet2 DIN mount

Post by Andrey.Mazlin »

Hi
Moved this topic to the correct place and answered you by mail.
Andrey Mazlin, Application Support Engineer
Useful links:
https://fit-iot.com/web/
Support Wiki: http://www.fit-pc.com/wiki/
Support mail: fitpcsupport@compulab.co.il

Post Reply

Return to “fitlet2 hardware”