fit-IoT Users Forum

Hello,
Where can I find the pinout of the mini serial connector (RS232) ?

The Pinout for the RS232 default port in the fitlet2 is as follows:

1 - COM1_TX
2 - COM1_RTS
3 - COM1_RX
4 - COM1_CTS
5 - X
6 - X
7 - X
8 - GND

thanks!
Where can I find the pin layout and the connector reference?
I believe it is a mini B USB, but is not really sure

It is an ultra-mini serial port
see
https://fit-iot.com/web/product/rs232-adapter/
(changed link)

Yes, this I've already understood from the doucmentation.
For my I application, I will need to make my own cabling.

Any hints on connector reference are welcome

mytest wrote:Yes, this I've already understood from the doucmentation.
For my I application, I will need to make my own cabling.

Any hints on connector reference are welcome

Sent a PM with more info of the adapter cable

thanks

Hi tamir,

I'm also looking for more info. If you can also PM me.

I lost my cable and can't find where to buy a new one without being crazy expensive.

I'll try to solder some wires.

Thanks

Best regards

tamir wrote:

mytest wrote:Yes, this I've already understood from the doucmentation.
For my I application, I will need to make my own cabling.

Any hints on connector reference are welcome

Sent a PM with more info of the adapter cable

Sent from my Pixel 2 XL using Tapatalk

MrMathMo wrote:Hi tamir,

I'm also looking for more info. If you can also PM me.

I lost my cable and can't find where to buy a new one without being crazy expensive.

I'll try to solder some wires.

Thanks

Best regards

tamir wrote:

mytest wrote:Yes, this I've already understood from the doucmentation.
For my I application, I will need to make my own cabling.

Any hints on connector reference are welcome

Sent a PM with more info of the adapter cable

Sent from my Pixel 2 XL using Tapatalk

Sent PM

Can I also get this info? Thanks!