I have a question about the DIN rail mount for the fitlet2. I recently built a number of items for a customer that included a DIN-mounted fitlet2. All were damaged in shipping, I suspect because of the separation between the fitlet2 and DIN rail due to the standoffs in the kit.
Do you have a recommended solution for DIN-mounting similar to what's shown on the product page (https://fit-iot.com/web/products/fitlet2/)? Can you share the necessary screw size and length to mount the DIN bracket directly to the VESA plate?
fitlet2 DIN mount
Moderator: Andrey.Mazlin
-
Karl.Palutke
- Posts: 2
- Joined: Thu Jun 02, 2022 9:26 pm
Re: fitlet2 DIN mount
Oops! looks like I posted this in the wrong area. Is there a way for me to move it to the hardware forum?
-
Andrey.Mazlin
- Posts: 102
- Joined: Tue May 05, 2020 10:02 am
Re: fitlet2 DIN mount
Hi
Moved this topic to the correct place and answered you by mail.
Moved this topic to the correct place and answered you by mail.
Andrey Mazlin,
Edge Computers Department Application Support Engineer
Useful links:
Main site: https://edge.compulab.com/
Support Wiki: http://www.fit-pc.com/wiki/
Support mail: edgesupport@compulab.co.il
Edge Computers Department Application Support Engineer
Useful links:
Main site: https://edge.compulab.com/
Support Wiki: http://www.fit-pc.com/wiki/
Support mail: edgesupport@compulab.co.il