Page 2 of 2
Re: LAN Interfaces Not Visible in OS
Posted: Mon Apr 29, 2019 6:52 am
by tamir
Does your units have any kind of FACET card (extension board) installed?
Re: LAN Interfaces Not Visible in OS
Posted: Mon Apr 29, 2019 12:02 pm
by edavid
I had the same issue. one port missing.
did the BIOS reset :
http://fit-pc.com/wiki/index.php?title= ... leshooting
now it works.
a regular reset from within the BIOS didn't have any effect
there's a FPCI FACET installed.
Re: LAN Interfaces Not Visible in OS
Posted: Mon Apr 29, 2019 4:01 pm
by JohnGalt
@edavid ... I did receive this link from CompuLab this morning.
https://fit-pc.com/wiki/index.php?title ... n_start-up
Basically on Rev 1.0 and 1.1 FC cards, there is a problem which effects the power sequencing, this resulting the dropping of the built in Ethernet interface(s).
We are starting the process of replacing all our FC-PCI Rev 1.0 boards with the 1.2 ... I'm so thankful this isn't something wrong in the underlying Fitlet2 board. Once I confirm that this FC-PCI Rev 1.2 board fixes the problem, I'll post back here.
Re: LAN Interfaces Not Visible in OS
Posted: Mon Apr 29, 2019 4:27 pm
by ericarnoldy
Watching this thread
Re: LAN Interfaces Not Visible in OS
Posted: Tue Apr 30, 2019 6:26 am
by irads
Any fitlet2 user suffering from erratum FITLET2ERR005, please contact
support@fit-pc.com for handling.
https://fit-pc.com/wiki/index.php?title ... n_start-up
We will usually replace the problematic FACET-Card by RMA.
Sorry for the inconvenience.
Re: LAN Interfaces Not Visible in OS
Posted: Thu May 09, 2019 1:45 pm
by edavid
Sad to hear that.
I just received 3 FPCI and 4FPOE. all of them on v1.0