ECC memory failures detection and handling

Post Reply
dlast
Posts: 14
Joined: Wed Feb 22, 2012 4:26 pm

ECC memory failures detection and handling

Post by dlast »

Hello, I wonder, how is Airtop with ECC memory going to behave when the memory starts failing?

In particular I have Airtop 2 with Ubuntu 20.04.

Apparently in Linux there is a support for monitoring ECC failures, implemented in rasdaemon, relying on EDAC kernel drivers, with installation described for example here:
https://www.setphaserstostun.org/posts/ ... rasdaemon/

But on my Airtop I get the following output

Code: Select all

#ras-mc-ctl --status
ras-mc-ctl: drivers are not loaded
Is Airtop supported by some of the EDAC drivers?

Post Reply

Return to “General Airtop questions”