High (1.5V) voltage DDR support

RAM modules, mSATA and other devices compatible with fitlet
Post Reply
Posts: 4
Joined: Wed Dec 16, 2015 9:49 pm

High (1.5V) voltage DDR support

Post by Londo »

Just want to report the following:

I have been using 8Gb 1.5V DDR3 (not DDR3L) on a fitlet now for weeks without any problems (and I have been using the PC a lot lately, doing intensive stuff). The name of the ram is
"Kingston 8GB KFJ-FPC3B/8G DDR3 1333MHz"

I dont know why it is working so well, but it does, so there you have it.

Posts: 145
Joined: Sun Nov 20, 2011 10:43 pm

Re: High (1.5V) voltage DDR support

Post by Arwen »

Some of the Kingston RAM is dual voltage. Meaning it will work at 1.5 volts and 1.35
volts. All 3 of my Kingston RAM, (in SO-DIMM form facter), are such. See this thread;


It is likely that true 1.5 volt only memory will not work with fitlet models due to the SoC,
(System on a Chip), not supporting them.
Arwen Evenstar
Rivendale, Middle Earth

Post Reply

Return to “fitlet compatible devices”