Monitors or T.V.s - Used or tried by customers

RAM modules, mSATA and other devices compatible with fitlet
Post Reply
Arwen
Posts: 145
Joined: Sun Nov 20, 2011 10:43 pm

Monitors or T.V.s - Used or tried by customers

Post by Arwen »

End-users,
Feel free to reply with information on your video monitors or T.V., known to work or
not. Please specify which fitlet model, and enough details about your monitor or T.V.
for someone else to purchase.

If you have multiple resolutions and refresh rates tested, please add.

Below is a template
---
Here is the monitor I have used successfully;

My fitlet model - MY_MODEL

Vendor - VENDOR NAME
Model - PART NUMBER
Type - (Monitor or T.V.)
Size - (Diagonal size in inches or centimeters)
Resolution(s) - (Horizantal and vertical)
Refresh rate(s) - (If relevant)
Interface - (Direct HDMI or used special adapter like HDMI to VGA)
Last edited by Arwen on Wed Dec 16, 2015 6:37 pm, edited 1 time in total.
Arwen Evenstar
Rivendale, Middle Earth

Arwen
Posts: 145
Joined: Sun Nov 20, 2011 10:43 pm

Re: Monitors or T.V.s - Used or tried by customers

Post by Arwen »

The following thread shows that vendor rep Irad Stavi has tested a fitlet with
2560x1440 resolution, and can confirm it works.

http://www.fit-pc.com/forum/viewtopic.php?f=145&t=5550
Last edited by Arwen on Wed Dec 16, 2015 6:38 pm, edited 1 time in total.
Arwen Evenstar
Rivendale, Middle Earth

ausppc
Posts: 3
Joined: Sun Aug 09, 2015 1:06 am

Re: Moinitors or T.V.s - Used or tried by customers

Post by ausppc »

Good news re: higher resolution output. :)

I've noticed that the MintBox Mini and fitlet-i default to some overscan setting when outputing hdmi to my Samsung SyncMaster 2494hs (1920x1080). This display has 1x hdmi, 1x dvi & 1x vga. Due to this overscan effect, the menu running across the top of the display and the start menu, task selector & etc aren't visible. When using the hdmi -> dvi cable the display appears as expected. I haven't tested hdmi -> vga as I don't have that kind of adaptor.

I mentioned this to a friend and he showed me how overscan and underscan can be adjusted on OS X but I've never seen an equivalent on Linux Mint.

hassellbear
Posts: 106
Joined: Mon May 28, 2012 12:25 pm

Re: Moinitors or T.V.s - Used or tried by customers

Post by hassellbear »

For overscan - underscan adjsutment, have you tried the Catalyst Control Center?
MintMenu.JPG
MintMenu.JPG (40.06 KiB) Viewed 11473 times
Catalyst Control Center.png
Catalyst Control Center.png (89.61 KiB) Viewed 11473 times

bradjj
Posts: 19
Joined: Wed Jul 15, 2015 1:56 am

Re: Moinitors or T.V.s - Used or tried by customers

Post by bradjj »

Here are two monitors I have used successfully;

My fitlet model - MintBox Mini

Vendor - TCL
Model - L40D2700F
Type - TV (FHD)
Size - 40" (101cm)
Resolution - 1920 X 1080
Refresh rate - 60Hz
Interface - HDMI for both video and sound
Notes - Need to use 'Panorama' Zoom mode for correct display


My fitlet models - MintBox Mini and Fitlet B

Vendor - Soniq
Model - E32W13A
Type - TV (HD)
Size - 32" (80cm)
Resolution(s) - 1366 X 768
Refresh rate - 60Hz (from memory I think 60Hz)
Interface - HDMI for both video and sound
Notes - Used this till it stopped working and then bought the TCL above

Post Reply

Return to “fitlet compatible devices”