Fitlet XA10 and mSATA install

Post Reply
neilhu
Posts: 2
Joined: Fri Oct 23, 2015 1:23 am

Fitlet XA10 and mSATA install

Post by neilhu »

I must be looking at this wrong, but I cannot figure out how to install the mSATA card.
I have installed the memory, but there doesn't seem to be a slot for the mSATA, since the FACET is installed in it.
Any help would be appreciated

Thanks
Neil

Arwen
Posts: 145
Joined: Sun Nov 20, 2011 10:43 pm

Re: Fitlet XA10 and mSATA install

Post by Arwen »

I don't have a XA10, but do have an iA10. In my case, I had to temporarily
remove the WiFi card to get access to all of the mSATA slot. It's possible
you have to do the same, but with the X-LAN card.
Arwen Evenstar
Rivendale, Middle Earth

irads

Re: Fitlet XA10 and mSATA install

Post by irads »

mSATA is installed below the FACET in the opposite socket. Remove FACET, install mSATA and then restore FACET.

neilhu
Posts: 2
Joined: Fri Oct 23, 2015 1:23 am

Re: Fitlet XA10 and mSATA install

Post by neilhu »

Thank you, removing the FACET allowed the mSATA SSD to be installed. Thank you

Post Reply

Return to “General fitlet questions”