Random NIC Failure

Post Reply
rnicol
Posts: 1
Joined: Tue Apr 23, 2013 4:26 pm

Random NIC Failure

Post by rnicol »

Hi,

I have the FITPC3 with the 4 x NIC & 4 USB FACE module running as a firewall using IPCop firewall with all the patches installed. The cable modem is connected to the NIC on the rear of the device and the internal network is connected to the leftmost NIC on the front via a Netgear 8 x 1GB port switch. WiFi is not active and no other devices are connected to the other NIC ports. The HDD has been changed for an SSD.

Normally the green light on the fron port flashes and the orange light is steady but periodically the orange light goes out and the internal network loses internet connectivity nor is it possible to connect to the IPCop web interface. The only way to recover connectivity is to power the device off and back on again.

Any ideas?


Richard

irads

Re: Random NIC Failure

Post by irads »

It may be a crash of the ethernet controller or the driver. We have no experience with IPCOP, but before trying anything else I would check about known issues and a driver for Intel 82583.

Henrik Meyer
Posts: 1
Joined: Tue Jun 04, 2013 12:33 pm

Re: Random NIC Failure

Post by Henrik Meyer »

Hi,

Was this issue ever resolved?

We are facing the same issue using Ubuntu Server.

Thanks

regards
Henrik

irads

Re: Random NIC Failure

Post by irads »

Please describe the problem in more detail.

Post Reply

Return to “General FACE Module questions”