fit-IoT Users Forum

I am in a hurry, but LIRC support in lucid works out of the box for me. I will check back and post some config settings. --edit-- DEBIAN_FRONTEND=noninteractive sudo apt-get install lirc ( echo REMOTE=\"Igor Cesko\'s USB IR Receiver\" echo REMOTE_MODULES=\"lirc_dev lirc_igorplugusb\" echo REMOTE_DRI...

I haven't checked to see if the compulab xorg file makes a difference, It should make a difference, because without you will most likely not be able to get X up. what would happen if i followed the 9.10 instructions using 10.04? You will run into version mismatches. The packages are not built for l...

Linux shutdown works, although I had some problems not powering off at all at first. This issue is gone now.

I think the USB-Ports are powered at all time, but I am actually not sure. The fitpc2-sbc reference guide shows 70mA to 90mA in "off" mode.

You might want to have a look at [1] for enabling the gma500 gpu including basic 3d and hardware video acceleration. For the xorg.conf you should have a look at the one provided by Compulab. Maybe this one works out of the box. If not, generate your own xorg.conf and play around with the Device-Sect...

It is likely that during the installation also just the 4GB HD showed up, and that it was this one that I programmed to be erased and used in its entirety. Again... this is exactly the problem in discussed in the thread mentioned before: I won't work with a batch file as the hard drive won't be det...

The fitpc2 is like any other computer. What most users don't see, is that computers are utterly broken... Please provided some additional information: Which fitPC2 are you using (model and revision)? Which media are you installing from (and to)? If you are using an fitpc2i from the pilot batch, some...

The kernel changes found in the thread regarding the server version should apply tot he desktop version, too. However, I don't own the hardware to test it.

Again., this looks like a fitpc2i from the pilot batch of the series. The solution is described at [1].

[1] http://fit-pc2.com/forum/viewtopic.php?f=58&t=1651

Looks fine so far. Now try aplay /usr/share/sounds/alsa/Front_Center.wav If it throws an error, include the message here. You might want to check if your user is in the audio group: groups If it display something like "WAVE '/usr/share/sounds/alsa/Front_Center.wav' : Signed 16 bit Little Endian, Rat...

Well, if you can't hear any sound at all, it doesn't seem to be a skype problem...

Check, if alsa sees the sound card: If so, check the volume of master and pcm: