fit-IoT Users Forum

Hello there. I have been running a fit-pc2i (1ghz, 1gig ram) for about 2 years now, 24/7 .. its an impressive little machine. However, I'm starting to require a little more power (multi-tasking in particular). I also have a LOT of USB devices which the fit-pc2i cannot handle. I know the fit-pc3 has ...

Symptom: After updating to BIOS 21-Jul-09 booting from HDD may fail with error message "Operating system not found". Work around: In BIOS setup - Under Advanced , set Boot-time Diagnostic Screen to disable Solution: This behavior will be addressed in next BIOS release. Thanks to the forum members f...

That's seems like a operating system problem. You can to reinstall an OS using a USB flash drive. Google it for several tools to prepare your USB flash installation (tools like http://wintoflash.com/home/en/). For making the recovery process much easier in a future, you can prepare a system image o...

I have 5 Fits, and 5 SSDs running windows7 pro. All of them will allow me to install windows, and run windows updates. At first it seemed when the Ethernet drivers were installed, upon reboot i would get a "no disk detected" After rebooting the machine, BIOS will show me 0 drives attached. Reboot a...

Its been a while but I wanted to update and say that I had solved this issue. my fit-pc2i is powered off a solar array, though the charge controller on the solar array has a common ground, I found it necessary to add an independent ground to my load, this solved the issue - in case anyone out there ...

Dear Charliebishop, I am a HW Engineer. Please explain the term "pigtails" - it is not an engineering terminology and thus not clear. It is better if you could send a capture of the system and its power source. Anyway, I guess it is some kind of cable/harness used to connect your DC power source to...

Yes mbirger, it does. My unit indeed does boot headless just fine when using the AC adapter, HOWEVER, it will not boot up headless when using the pigtails to connect to a 12v battery system (it will only boot when a monitor is plugged in when using pigtails). Can one of the Fit-PC engineers determin...

Power LED should light when fit-PC2i is turned on whether a display is connected or not. If this is not the case it is likely a hardware problem. If the problem is driver related, check the new fit-Headless plug http://www.fit-pc.com/web/products/accessories/fit-headless/ Hi Irads, thanks for the p...

Hi all, love my fit-pc2i, but cannot get it to boot without a monitor plugged into the DVI slot .. In fact, if I am running the machine, and unplug the DVI cable, the fit-pc2i turns off! is there anything I can change so that the system can run in a headless mode? I tried downloading the IEMGD "head...

Hello, I am currently running an experiment with a weather station in a remote location. The weather station has a datalogger. I also have a few solar panels and batteries with a datalogger as well. I am looking for a low power computer which can turn on several times per day, connect to the datalog...