Search found 27 matches

by Will.Rubin
Thu May 12, 2016 10:23 am
Forum: General Airtop questions
Topic: Boot Windows from USB Flash Drive?
Replies: 2
Views: 3992

Re: Boot Windows from USB Flash Drive?

Thanks for the reply. I would hope it would boot Windows from a flash drive as it's pretty common these days and the way I've installed Windows and Linux on Fit-PCs, Intense PCs, and one uSRV machine. Guess I'll find out soon enough. A couple Airtops arrive next week. I'll post back after I verify.
by Will.Rubin
Wed May 11, 2016 7:26 pm
Forum: General Airtop questions
Topic: Boot Windows from USB Flash Drive?
Replies: 2
Views: 3992

Boot Windows from USB Flash Drive?

Wiki features chart has note saying, "Boot from USB ports is supported by BIOS, but Windows OS cannot be booted from USB."

Does that mean I can't boot from a flash drive to install Windows?
Or does that just mean I can't run Windows from a flash drive?
by Will.Rubin
Wed May 11, 2016 12:42 pm
Forum: General Airtop questions
Topic: Boot Drive Options
Replies: 1
Views: 3483

Boot Drive Options

Can I install/boot from any of the 4x 2.5” HDD/SSD in disks cartridge locations?
If yes, is there any particular benefit to using the mSATA slot?
(I'd prefer not to use an mSATA drive unless necessary.)
by Will.Rubin
Tue Mar 01, 2016 7:12 pm
Forum: General Airtop questions
Topic: VESA Mount?
Replies: 1
Views: 3244

VESA Mount?

Does the Airtop have any option for VESA mounting? Separate bracket or otherwise.
by Will.Rubin
Fri Nov 13, 2015 11:40 am
Forum: Windows on Intense PC
Topic: Windows 10 Drivers Threshold 2 just out.
Replies: 1
Views: 5459

Windows 10 Drivers Threshold 2 just out.

Any word on Windows 10 drivers? Threshold 2 just came out and it appears this one has clean install options so I'd like to try it on IPC or uSRV. I saw the link to Windows 10 on the software page but it appears to be just a placeholder. Status?

Thanks
by Will.Rubin
Wed Mar 11, 2015 10:24 am
Forum: IPC2 Hardware
Topic: Maxing CPU heat levels
Replies: 6
Views: 5827

Re: Maxing CPU heat levels

I'm bummed to see your response, but glad you responded. Thanks. I've been playing with the IPC2 for the last few days to see where it can fit, and based on your reply I honestly don't know what I could run on the machine to keep the temperatures in the desired below 50C range?! Booting Win8 and doi...
by Will.Rubin
Thu Mar 05, 2015 6:31 pm
Forum: IPC2 Hardware
Topic: Maxing CPU heat levels
Replies: 6
Views: 5827

Re: Maxing CPU heat levels

I received my RMA'd IPC2. Unfortunately, this IPC2 exhibits the same thermal overheating as the previous unit. Though over a slightly longer time. I've attached graphs of the CPU temps when running LinPack via OCCT. The graphs are from a completely cold start. First boot after machine turned off and...
by Will.Rubin
Fri Feb 06, 2015 10:22 pm
Forum: IPC2 Hardware
Topic: Maxing CPU heat levels
Replies: 6
Views: 5827

Re: Maxing CPU heat levels

A couple/few minutes to hit 100C when CPU is running at 100% from cold. Once the PC has "warmed up" it only takes 20-30 seconds or so to go from 60C back to 100C. The case maybe gets a bit warmer than the IPC1, but not enough to prevent you from touching it or anything. (My infrared thermometer died...
by Will.Rubin
Fri Feb 06, 2015 6:13 pm
Forum: IPC2 Hardware
Topic: Maxing CPU heat levels
Replies: 6
Views: 5827

Maxing CPU heat levels

Just received an IPC2 and am having trouble with the CPU temps. The idle temps are in the low 50C range. A bit higher than expected but not too bad. But when CPU runs at 100% the core temps very quickly hit the maximum 100C mark and the cores start throttling. . Should I be seeing these high tempera...
by Will.Rubin
Wed Sep 17, 2014 6:29 pm
Forum: IPC2 availability
Topic: IPC2 i7 Barebone availability
Replies: 13
Views: 11774

Re: IPC2 i7 Barebone availability

Is there any idea of IPC2 I7 Barebone availability both here and at Amazon?

In other words, in large enough stock to show up even at Amazon for a few weeks at a time.

Go to advanced search