Search found 21 matches

by Andrey.Mazlin
Sun Oct 25, 2020 7:20 am
Forum: General Airtop3 questions
Topic: Just Arrived But No Signal on Display
Replies: 3
Views: 43

Re: Just Arrived But No Signal on Display

The default BIOS setting of this device is sending an output to the external graphical card, not integrated. If you succeeded to connect the display to your discrete card and get output, follow the instruction below: 1. Access BIOS 2. Switch "Default Display" to "On-board Graphics" (located under t...
by Andrey.Mazlin
Tue Sep 29, 2020 2:00 pm
Forum: fitlet2 hardware
Topic: Substituting a 128GB ssd for the original 64GB
Replies: 2
Views: 269

Re: Substituting a 128GB ssd for the original 64GB

Here you can find a list of checked SSD drives. In your case it can be known M.2 SATA issue
by Andrey.Mazlin
Sat Aug 08, 2020 10:10 am
Forum: General Airtop3 questions
Topic: Airtop3 just arrived, BIOS light not on, can't boot from USB
Replies: 4
Views: 497

Re: Airtop3 just arrived, BIOS light not on, can't boot from USB

Please send all this information to our support address (fitpcsupport@compulab.co.il) together with the Serial Number of this device.
by Andrey.Mazlin
Thu Aug 06, 2020 7:21 am
Forum: General Airtop3 questions
Topic: Airtop3 just arrived, BIOS light not on, can't boot from USB
Replies: 4
Views: 497

Re: Airtop3 just arrived, BIOS light not on, can't boot from USB

Here the link to the list of tested memory modules for Airtop3 device: https://docs.google.com/spreadsheets/d/1Yf5vDPGtsS29brV6SNWsSesIRJZcQQc3wEONhmXkQIY/edit?usp=sharing Also - recommend to use our Wiki site for finding useful information https://fit-pc.com/wiki/index.php?title=Main_Page Regarding...
by Andrey.Mazlin
Wed Aug 05, 2020 9:34 am
Forum: FACET Cards ECN
Topic: FC-USB revision 1.3
Replies: 0
Views: 301

FC-USB revision 1.3

In the revision 1.3 of FC-USB FACET Card added M.2 Key-E socket (normally used for WiFi) Updated FACET Card documentation can be found in the link below: https://fit-pc.com/wiki/index.php?title=FC-USB_FACET_Card There are 3 differences between the 2 revisions: New USB HUB (with a new I2C address). A...
by Andrey.Mazlin
Wed Jul 22, 2020 10:28 am
Forum: General Airtop3 questions
Topic: MintBox3 USB booting
Replies: 5
Views: 621

Re: MintBox3 USB booting

Sure Andrey, Willing to try the update. I would need a link to the file (I could only find Phoenix files in your site) And instructions. Please note, I do not have easy access to anything Microsoft, I would *much* rather do all updates using Linux computers, of which I have over 20, and nothing Mic...
by Andrey.Mazlin
Tue Jul 21, 2020 8:56 am
Forum: General fitlet2 questions
Topic: Boot Order
Replies: 2
Views: 412

Re: Boot Order Solved

Margo. wrote:
Mon Jul 20, 2020 8:10 pm
I figured it out; I needed to use the + key. I installed kubuntu and now my printer works, but I still don't have sound : (
Maybe this KB can be relevant?
https://fit-pc.com/wiki/index.php?title ... _out/SPDIF
by Andrey.Mazlin
Tue Jul 21, 2020 8:51 am
Forum: Airtop3 Hardware
Topic: Mintbox3 FACE Module
Replies: 2
Views: 386

Re: Mintbox3 FACE Module

Hi, Do you mean the default FMAT3 card that gives some extensions to the front panel? Take a look at my Airtop3 (in general the MintBox3 is the same) Airtop3 USB front.jpg I don't see here any visible problem with placement of blue tab inside of the port. Can you please send mail to support (fitpcsu...
by Andrey.Mazlin
Tue Jul 21, 2020 8:28 am
Forum: General Airtop3 questions
Topic: MintBox3 USB booting
Replies: 5
Views: 621

Re: MintBox3 USB booting

Please take a look at the BIOS MintBox3.
Accordingly to this page you have a previous version (0.30.03). So I'd recommend you to upgrade your BIOS to the 0.30.04 from 12-Feb-2020

Go to advanced search